8 Service, Accessories & Spares
8.1 Rectifier replacement
If a faulty rectifier is to be replaced simply unscrew the two front panel fixings on the rectifier front panel and withdraw the rectifier from the shelf. A replacement rectifier can then be inserted directly into the shelf and will
Note – The rectifiers are “hot plugable” and therefore can be replaced without turning the system off.
8.2 Controller replacement
If the alarm card is to be replaced simply unscrew the two front panel fixings and withdraw the module from the shelf. A replacement module can then be inserted directly into the shelf and will
Note - with the module removed the system will revert to default rectifier conditions of 54.5V. Some alarms and all control functions will be unavailable including battery monitoring.
Entire contents copyright © 2001 American Power Conversion. All rights reserved. Reproduction in whole or in part without permission is prohibited. APC and the APC logo are registered trademarks of American Power Conversion Corporation. All other trademarks, product names, and corporate names are the property of their respective owners and are used for informational purposes only.
User Manual | Page 44 of 44 | 18th FEB 02 |
DC MX06 40A Shelf |
