1 General Information
1.1 Introduction
DC Power Plants from APC have unique features that make them easy to install, maintain, and upgrade. The rectifier units are modular and truly
All system settings are controlled from the system control unit that provides monitoring and control functions for each component of the system as well as alarm outputs for system diagnosis and maintenance.
The APC international network of sales and service offices and qualified representatives provides sales assistance for proposals, purchases, and
1.2 Safety Precautions
The unit must be installed into an enclosure which conforms to the requirements of EN60950 : 2000, CAN/CSA 22.2 # 60950, UL60950 3rd Edition and be connected to comply with the standard. This includes but is not limited to providing external disconnection devices.
The end use equipment must be installed in accordance with the local building code and practices, by proper licensed installation personnel, taking into consideration all cautions and requirements detailed in this manual.
For proper guidance on the selection of any external disconnects and cabling requirements see the CEC and NEC codes or the local electrical code of the country of installation.
Before using the power system, carry out the following:
1.2.1READ AND FOLLOW THE SAFETY PROCEDURES.
1.2.2REFER TO THE FOLLOWING DOCUMENTS. ALL PROCEDURES MUST BE CARRIED OUT IN ACCORDANCE WITH THE INSTRUCTIONS THEREIN.
•EN60950 : 2000, CAN/CSA 22.2 # 60950, UL60950.
•MANUFACTURER’S INSTRUCTIONS
•MATERIAL SAFETY DATA SHEET (MSDS) FOR THE BATTERY (If batteries are supplied with the system)
•HEALTH AND SAFETY AT WORK ACT, 1974 (UK)
•OCCUPATIONAL SAFETY & HEALTH STANDARDS (OHSA) (USA)
•ELECTRICITY AT WORK ACT, 1989 (UK)
•NFPA 70 NATIONAL ELECTRICAL CODE (USA)
User Manual | Page 5 of 44 | 18th FEB 02 |
DC MX06 40A Shelf |
