Contents
UXI/UXICH
Page
Contents
Page
About this UPS
Unpack package contents
Environmental Specifications
Specifications
Install PowerView
Installation
Route ethernet cable and install top cover and bezels
Connect PowerView
Front panel access routing ethernet cable under top cover
Optional accessories
Accessories
Install input and output wiring trays in UPS rear panel
Adhere to national and local electrical codes when wiring
Wiring Specifications
Input/Output Jumper Configurations
Input wiring options
Single phase input, single phase output, dual feed
Single phase input, single phase output, single feed
Three phase input, three phase output, dual feed
Three phase input, single phase output, single feed
Three phase input, three phase output, single feed
Three phase input, single phase output, dual feed
L3 L2 L1 OSJ
Output wiring options
Servicing of external batteries
Battery Safety
APC battery solution
Qualified electrician should perform the installation
Each battery system must have identical Amp-hrs
Third party battery solution
Normal operation
PowerView Interface Display
Battery operation
Operation
Main Menu Screen
Navigating menu screens
Navigating sub menu screens
Menu Tree
System
Sub menu screens
View Log
Connect power to UPS and load
Connect load to UPS
Communication Ports
EPO Connector
Emergency Power Off EPO
Input/Output Jumper Configurations
Page
Refer to Contact Information in this
Option 2 Correct bypass input
Service and Transport
Warranty claims
Models
Regulatory Agency Approvals