AMT Datasouth 400 manual Ribbon Core Notch Location

3.Raise the printhead module to the vertical position.

4.Verify that the Supply Core and the Take-up Core have two slots on the left side of the ribbon core when the ribbon is positioned to go into the printer. These notches will be inserted into the notches on the Left Ribbon Holders.

Note: The notches are the drive mechanism for the ribbon. If the slots in the core are not present or if they are in the wrong position, contact your ribbon supplier to obtain a correct ribbon.

Notch

Figure 7 - Ribbon Core Notch Location

User's Guide 13