AMX MVP-8400 manual Icm-Talk, Icm-Listen

Programming

Intercom Commands (Cont.)

^ICM-TALK	Intercom modify command. For backwards compatibility both versions are supported.
^ICM-LISTEN	In this release, however, the TALK and LISTEN subcommands are ignored. The
Intercom modify	microphone and/or speaker are activated based on the initial mode value of the intercom
	start command and the audio data packet flow is started upon receipt of this command by
command.
	the panel.
	Syntax:
	SEND_COMMAND <DEV>,"'^ICM-TALK'"
	Variables:
	None.
	Example:
	SEND_COMMAND TP1,"'^ICM-TALK'"

140 MVP-7500/8400 Modero Viewpoint Wireless Touch Panels