AMX MVP-8400 manual Project Information

Setup Pages

Project Information Page

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Setup page provides a constant visual
	indication of current connection status.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
File Name:	Displays the name of the TPDesign4 project file downloaded to the panel.
Designer ID:	Displays the designer information.
File Revision:	Displays the revision number of the file.
Dealer ID:	Displays the dealer ID number (unique to every dealer and entered in TPD4).
Job Name:	Displays the job name.
Sales Order:	Displays the sales order information.
Purchase Order:	Displays the purchase order information.
AMX IR 38K Port:	Displays the AMX 38 kHz IR channel port used by the IR Emitter on the panel.
	• This information is specified in TPD4 (Project Properties > IR Emitters &
	Receivers tab).
	• For example if you set the AMX IR 38K Port to 7 and then put a button on the
	panel with a channel code of 5 and a port of 7, it will trigger the IR code in slot 5
	of the AMX IR 38K Port.
AMX IR 455K Port:	Displays the AMX 455 kHz IR channel port used by the IR Emitter on the panel.
IR User Def 1 Port:	Displays the User Defined IR channel port used by the IR Emitter on the panel.
	• Note: User Defined ports can be downloaded by the user and are customizable,
	whereas the AMX ones are fixed.
IR User Def 2 Port:	Displays the User Defined IR channel port used by the IR Emitter on the panel.
Build Number:	Displays the build number information of the TPD4 software used to create the
	project file.
Creation Date:	Displays the project creation date.
Revision Date:	Displays the last revision date for the project.
Last Save Date:	Displays the last date the project was saved.
Blink Rate:	Displays the feedback blink rate, in .10 second increments.
Job Comments:	Displays any comments associated to the job (from the TPD4 project file).
Cradle Sensor Port:	Displays the port assignment being used to report Cradle Sensor information.
Cradle Sensor Channel:	Displays the channel assignment being used to report Cradle Sensor information.
	The channel is turned on when the panel is docked (in either the TDS or WDS
	docking stations.

IR receivers and transmitters on G4 panels share the device address number of the panel.

54 MVP Modero ViewPoint Touch Panels