AMX MVP-8400 manual Connection Status, Display Timeout, Inactivity Page Flip, Panel Brightness

Setup Pages

Setup Page (Cont.)

Connection Status:	Displays whether the panel is communicating externally as well as the encryption
	status of the Master, the connection type (Ethernet or USB), and what System the
	panel is connected to.
	• Until a connection is established, the message displayed is: “Attempting via...”.
	• When a connection is established, the message displayed is either: “Connected
	via Ethernet “or “Connected via USB “.
	• The word “Encrypted” appears when an encrypted connection is established with
	a NetLinx Master.
	Note: The panel must be rebooted before incorporating any panel communication
	changes and to detect Ethernet connections.
Display Timeout:	Indicates the length of time that the panel can remain idle before activating Sleep
	mode (causing the LCD to power down).
	• Press the UP/DN buttons to increase/decrease the Display Timeout setting.
	Range = 0 - 240 (minutes).
	• Set the timeout value to zero to disable Sleep mode.
	Note: Small timeout values maximize the life of the battery charge.
Inactivity Page Flip	Indicates the length of time that the panel can remain idle before automatically flip-
Timeout:	ping to a pre-selected page.
	• Press the UP/DN buttons to increase/decrease the Inactivity Page Flip Timeout
	setting. Range = 0 - 240 (minutes).
	• Set the timeout value to zero to disable Inactivity Page Flip mode.
	Note: The touch panel page used for the Inactivity page flip is shown within a small
	Inactivity Page field.
Panel Brightness:	Sets the display brightness level of the panel.
(MVP-8400 only)	• Press the UP/DN buttons to adjust the brightness level. Range = 0 - 100.
	Note: The on-screen bargraph can be dragged to adjust the brightness level which
	is then reflected as a numeric value in the Panel Brightness field.
LCD Control:	Sets the display brightness and contrast levels of the panel.
(MVP-7500 only)	• Press the Brightness UP/DN buttons to adjust the brightness level.
	Range = 0 - 100.
	• Press the Contrast UP/DN buttons to adjust the contrast level. Range = 0 - 100.

52 MVP Modero ViewPoint Touch Panels