Setup Pages

Batteries Page (Cont.)

Very Low Battery Warning: The UP/DN buttons adjust the time value (in minutes) available on the battery before the panel displays a very low battery warning (indicating near-term panel shutdown).

 

• Range = 3 - 15, default = 5 min.

 

• This value cannot exceed the Low Battery Warning value.

 

Note: This field applies to MVP-BP batteries installed in the panel.

 

 

Battery Status:

• The Combined Charge Status bargraph indicates the combined power

 

charge available from batteries installed in the panel.

 

• The Battery One Charge Status bargraph indicates the power charge

 

available on the Slot 1 battery (in the panel).

 

• The Battery Two Charge Status bargraph indicates the power charge

 

available on the Slot 2 battery (in the panel).

 

• The Battery Dock 1 Charge Status bargraph indicates the power charge

 

available on the docking station’s battery #1.

 

• The Battery Dock 2 Charge Status bargraph indicates the power charge

 

available on the docking station’s battery #2.

 

Note: If no batteries are being charged within the docking station’s battery com-

 

partments, or the MVP is not connected to a docking station; both Battery Dock

 

Charge Status fields are left blank.

 

• The Docking Station Version field indicates the firmware version currently

 

installed on the docking station.

 

• The Battery Level Port field indicates the port being used to report charge

 

status levels back to the NetLinx Master (set in TPDesign4).

 

• The Battery Level field indicates the level being used to report status levels

 

back to the NetLinx Master (set in TPDesign4).

60

MVP Modero ViewPoint Touch Panels

Page 67 Page 69
Page 68
Image 68
AMX MVP-8400 manual Battery Status, Charge Status fields are left blank
Page 67 Page 69
Top Page Image Contents