AMX MVP-8400 manual Protected Setup Navigation Buttons, Reboot Panel, Docking Station

Setup Pages

Protected Setup Page (Cont.)

System Recovery (Cont.):		• Remove User Pages - allows you remove all TPD4 touch panel pages
		currently on the panel, including the pre-installed AMX Demo pages. This
		option invokes a Confirmation dialog, prompting you to confirm your selection
		before removing the panel pages.
		Note that the YES button on the Confirmation dialog is disabled for 5 seconds
		as additional protection against accidentally resetting the panel or removing
		the panel pages.
Reboot Panel:		Pressing this button causes the panel to reboot after saving any changes.
Docking Station:		• Dock Status - illuminates when the MVP is docked and communicating with
		the Docking Station.
		• Undock Panel - forces the docking station to release the MVP without
		requiring a User Access username or password.
		• Disable Docking Station LED - disables the display of the LEDs on the
		docking station.
Channel Code
Channel Port
	3,132

BUTTON

2,8 3,50

Level Port

Channel Code

FIG. 51 Function Show example

Address Port Address Code

Protected Setup Navigation Buttons

The Protected Setup Navigation Buttons (FIG. 52) appear on the left of the panel screen when the Protected Setup page is currently active.

Closes the Protected Setup page

Press to access the G4 Web Control page where you can enable or disable remote display and control of the panel via a web-enabled PC running a VNC client.

Press to access the Passwords Setup page where you can specify firmware and user access passwords

.

Press to access the Calibration page where you can calibrate the panel-

.

Press to access the Wireless Settings page where you can configure wireless connection settings.

Press to access the System Settings page where you can configure

communication settings for the NetLinx Master and the panel

FIG. 52 Protected Setup Navigation Buttons

62 MVP Modero ViewPoint Touch Panels