Installation | Driver Installation |
8.Connect the MA24106A power sensor to the USB port of the PC with the supplied USB cable. The status LED will light green indicating that the sensor is turned ON.
9.When the Found New Hardware Wizard installation screen appears, select No, not this time to search for software, and then click Next. If the Wizard does not start, refer to Appendix C, “Serial Port Compatibility” for troubleshooting information.
Figure 2-8. Found New Hardware Wizard
10.Select Install from a list or specific location (Advanced), and then click Next.
Figure 2-9. Found New Hardware Wizard
MA24106A UG |
