Chapter 3 — Using the Power Sensor
3-1 Introduction
This chapter provides information on using the Anritsu Power Meter application with the MA24106A USB power sensor. It provides a description of the Graphical User Interface, various settings of the application, basic procedures for Making Measurements, as well as information about Uncertainty of a Measurement.
3-2 Graphical User Interface
The graphical user interface (Figure
•Buttons
•Data Entry Fields
•Display Window
•Status Bar
•Menu Bar
Display Window
Menu Bar
Buttons
Status Bar | Data Entry Fields |
Figure 3-1. Graphical User Interface
The Anritsu Power Meter application always launches in the default state as described below:
•Frequency: 50 MHz
•Power Units: dBm
•Averages: 1
•Fixed Offset: 0 dB
•Low Aperture Time: Fast Mode
Communication with the sensor does not take place until the Apply button is clicked or the Enter key on the keyboard is pressed.
MA24106A UG |
