Anritsu MA24106A, 0701012 manual Hardware and Software Requirements, Driver Installation

Chapter 2 — Installation

2-1 Introduction

This chapter provides information and instructions on operating the MA24106A power sensor. It contains the following:

•Hardware and Software Requirements for the Anritsu Power Meter Application

•Driver Installation procedure for properly installing the driver for the sensor

2-2 Hardware and Software Requirements

Please make sure that the following minimum requirements are met for installing and using the software:

•Intel® Pentium® III or equivalent processor

•Microsoft® Windows Vista® (32-bit only), Windows XP or Windows 2000

•512 MB of RAM

•100 MB of available hard-disk space

•1024 × 768 display resolution

•PC or laptop with a USB port and CD-ROM drive

2-3 Driver Installation

The driver must be installed before the MA24106A power sensor can be used. Follow the steps below as a guide for proper installation:

1.Insert the installation CD in the drive of your computer. If the installation menu does not start automatically, open the file named Startup.htm located on the CD.

Figure 2-1.Anritsu Power Meter Installation Menu

Note: If required, please install the Microsoft® .Net Framework, version 2.0.

2.Click Install Power Meter Application and select Run to start the installation.

MA24106A UG 2-1