Antec DF-30 Turn this knob to adjust the fan, TOP 140 MM TWOCOOL FAN, FRONT 120 MM BLUE LED FANS

4.2

TOP 140 MM TWOCOOL™ FAN

The DF-30 comes with one 140mm TwoCool™ LED fan. This fan has a two-speed switch that lets you choose the speed best suited to your need and a switch to turn on or off the LED. These switches are located at the rear of the case. The default fan speed setting is Low.

140MM FAN SPECIFICATIONS:

Size:			140 x 25 mm two-speed fan
Rated Voltage:			12V DC
Operating Voltage:			10.8V ~ 13.2 V
	Speed	Input		Air Flow	Static Pressure
		Current
	High	0.3A		1.7m³ / min	0.8 mm-H2O
	1200RPM			(58.9 CFM)	(0.03inch-H2O)
	Low	0.2A		0.95m³ / min	0.28 mm-H2O
	800RPM			(33.6 CFM)	(0.01inch-H2O)

Noise

26dBA

21.8 dBA

Input

Power

3.6W

2.4W

4.3

FRONT 120 MM BLUE LED FANS

The DF-30 comes with two white 120 x 25 mm white LED fans which are pre-installed in front of each Fleet- Release™ access door to cool the hard drives. These fans are installed so that air will be blown into the case. Each fan comes with a speed control knob at the front of the faceplate. Turn the knob clockwise to increase the speed. The lowest speed is 1200 rpm while the highest speed is 2000 rpm.

120 MM BLUE LED FAN SPECIFICATIONS:
Size:			120 x 25 mm speed control fan
Rated Voltage:			12V DC
Operating Voltage:			10.8V ~ 13.2 V
	Speed	Input		Air Flow	Static Pressure
		Current
	Highest	0.3A		1.89m³ / min	2.55 mm-H2O
	2000RPM			(66.60 CFM)	(0.1inch-H2O)
	Lowest	0.15A		0.94m³ / min	0.637 mm-H2O
	1000RPM			(33.30 CFM)	(0.03inch-H2O)

Noise

34.5 dBA

19.45 dBA

Input

Power

3.6W

1.8W

Turn this knob to adjust the fan.

27