APC AP9268 manual Setting the ID Window Dwell Time

APC KVM Switch Installer/User Guide

5.Press Enter to accept the changes or press Esc to exit the menu without saving the changes.

Setting the ID Window Dwell Time

This menu selection lets you set the time that the ID Window remains on screen after a channel switch. Each channel can be configured independently. The default time is set for five seconds.

1.Highlight the channel you wish to change in the main OSD Window.

2.From the main OSD Window, press the Control key twice to access the Administrator Command Menu.

3.Select ‘Edit Channel’ from the Command Menu.

4.Choose the option ‘ID Dwell Time’.

5.Enter a number between 0-255 seconds. Entering 0 disables the ID Window. Entering 255 allows the ID Window to stay on screen the entire time the channel is active.

20