APC DP300E Series manual Keys used for programming, Programming example switch to bypass operation

Programming Parameters

4.2.2Keys used for programming

NOTE:

The display accuracy is ±1-2%,

±1 digit.

4.2.3Programming example - switch to bypass operation

NOTE:

This is only to illustrate an example. Please see chapter 2.6 - 2.7 for further details.

Action			Display shows
1. Press		to enter parameter stack
			Bypass operation
			: NO
2.	Press	or	until
			Bypass operation
3.	Press	until	: YES
4. Press		to store
5. Press		to exit	Bypass operation
To return to normal operation
Action			Display shows
6.	Press	to enter parameter stack
			Bypass operation
7.	Press	or	: YES
			until
			Bypass operation
8.	Press	until	: NO
9.	Press	to store
10. Press		to exit	Normal operation
			load power xx%

Programming of the other parameters can be performed in exactly the same way.

7OA0004 US rev. 02

User Guide Silcon DP300E Series 480V 400-500kVA 17