Two Memory Cards on RamKeeper

When using two cards with the RamKeeper, the card on the back side of RamKeeper must have memory in increments of 512K. So, you can use cards with 512K, 1 Meg, 1.5 Meg (i.e. GS-RAM), 2 Meg, 3 Meg, etc.

The drawings below illustrate the combinations we have tested and know will work. While other combinations may work, the combinations below are the ones we support.

RamKeeper

Back Pocket (in 512K increments)

Slot Mover

GS-RAM REV C or later

GS-RAM Plus REV 0 or later

All GS-RAM cards

GS-RAM 2 Meg Expander

(including 2 Meg Expander)

Apple IIGS Memory Expansion Card

Front Connector

RamPak 4GS

RamStackPlus

All GS-RAM cards

OnBoard

(except 2 Meg Expander)

* Due to its large size,

 

OctoRam will not fit on the

 

back side of RamKeeper

RamKeeper

 

Slot Mover

Back Pocket

Apple 256K - I Meg

Apple 1 Meg

RamStackPlus 256K - 1 Meg

RamStackPlus 1 Meg

OnBoard 1 - 4 Meg

On Board 4 Meg

OctoRam 256K - 1 Meg (256K chips)

 

 

RamKeeper

Slot Mover

Back Pocket

RamPak 4GS 512K - 1 Meg

RamPak 4GS 4 Meg

OctoRam 1 Meg - 4 Meg (1 Meg chips)

 

Chapter One - Getting Started

3