*Note: If you’re connecting only one card and it will work in the back pocket, you should install it there as this is the easiest connection to make. (Skip to step 10.)

Connecting GS-RAM Cards to the RamKeeper’s Front

*Note: If you have a SlotMover, skip to the next section.

To connect directly to the front of the RamKeeper, all GS- RAM cards (except the GS-RAM REV A and the CS-RAM- Plus REV A) require the male to male connector. (If you’re using a GS-RAM REV A or a GS-RAM Plus REV A, skip to step “C”.)

A)First, notice the white pegs in two holes of the RamKeeper.

Note pegs in front connector

8 RamKeeper