AppleWorks Modification Instructions
This is how to use the AW 2 Expander to modify the AppleWorks disks:
1.First, make copies of your original AppleWorks disks. Filer ,“provided on the AW 2 Expander disk, or the copy program on your System Utilities disk should be used for this purpose.
*Note: You must give the same name to the front and back side of the AppleWorks copy disk.
Instructions for copying with Filer are in the Appendix of this manual. Instruction for copying with the System Utilities are in the IIGS System Disk User’s Guide.
2.Boot the AW 2 Expander disk in your startup drive.
3.Select option 1 - “Execute AppleWorks Enhancements.”
4.The Applied Engineering AW 2 Expander copyright screen will then appear. After reading each of the screens, press the space bar to continue.
5.You’ll now be prompted to remove the AW 2 Expander disk and insert a COPY of the AppleWorks STARTUP disk in drive one. Be sure the WRITE PROTECT tab has been removed from the disk. As prompted at the bottom of the display screen, press the space bar to continue or the escape key to go back to the main menu.
The AW2 Expander program expects to find the AppleWorks STARTUP file, “APLWORKS.SYSTEM,” on the disk in drive one. If, at this point, the program displays the following message:
Cannot find correct file
Please enter the prefix of the AppleWorks program
?
enter the complete ProDOS prefix of the AppleWorks STARTUP disk. Be sure to include any (/) slashes for subdirectories.
An example ProDOS prefix of an AppleWorks subdirectory on a Apple 20 SCSI hard disk (with a volume directory name of /HARD) might be: /HARD/APPLEWORKS.
46 RamKeeper