The current enhancement-options configuration will be read from the parameter file (SEG.PR) on the AppleWorks program disk and displayed in the Getting Started option menu. The configuration shown contains the default settings. These default settings remain in effect until you change them and save the new configuration back to the AppleWorks program disk.

File: None GETTING STARTED

======================================================================

Getting Started

 

 

1.

Maximum Records/Lines (RW)

12,000

2.

Preload AppleWorks onto Memory

On

3.

Printer Buffer(RW)

Off

4.

suffer Size (GS)

0

K

5.

Reserved RamFactor Size (RF)

0

K

6.

Time Display

Off

7.Save Configuration

8.Continue with AppleWorks

Type number, or use arrows, then press Return

1113K Avail.

The Getting Started options menu

*Note: The options followed by (RW) are for RamWorks and Z-RAM products only. Those followed by (RF) apply only to the RamFactor. (GS) applies to the IIGS only.

Use the up and down arrow keys ( ) to highlight

the option you want. Use to select a highlighted option. For more information on the options, refer to the section entitled About the New Features. When you have made the desired changes, save the new configuration back to the AppleWorks program disk by selecting the

menu option Save Configuration.

Choose the option, Continue with AppleWorks. If you

didn’t save your new configuration, the new one will be in effect only until you quit the AppleWorks program. The next time you boot AppleWorks, the previous (saved) configuration will be used.

48 RamKeeper