2.) Select Æ Cache from the AW2 Expander main menu or execute the file,
AECACHE.SYSTEM.
While executing, the program will display the Æ startup screen accompanied by the message:
INSTALLING....
at the bottom of the screen.
If the Cache program does not find a properly installed RamKeeper or
REQUIRES
OR RAMKEEPER W/ MEMORY CARD
IN IIGS MEMORY EXPANSION SLOT
*Important: Switching from ProDOS 8 to ProDOS 16 with AECACHE . SYSTEM operating will cause unpredictable results. If you want to switch between operating systems, follow the directions for ProDOS 8 and ProDOS 16 following.
ProDOS 16 and ProDOS 8 or ProDOS 16 Only
If you’ll only be using ProDOS 16, or if you’ll be switching between 16 and 8, use the IIGS Finder or System Utilities to copy the Aecache . Setup file (from the AW2 Expander
disk) into the System. Setup folder located within the ProDOS 16 System folder on your boot disk(s) (see below).
S Y S T E M SYSTEM . SETUP AECACHE . SETUP
Where the file goes
Booting these modified disks will load the AE Cache option into your Classic Desk Accessories menu.
*Note: You must cold boot into ProDOS 16 to enable the AECACHE . SETUP file to work under both systems. You can then switch between ProDOS 8 and ProDOS 16 without deinstalling or reinstalling the Cache
If the Cache program does not find a properly installed
RamKeeper or
appear in the Desk Accessories menu.
40 RamKeeper