16.) Reconnect the battery cables to the GelICell’s connectors. The green LED light on the RamKeeper should come on. This indicates that your battery is working. If it doesn’t come on immediately, it is because it needs to be refreshed after its journey from our hands to yours. Continue with the installation and the Transformer will trickle charge the battery back to its full potential within 24 hours.
17.) Plug the transformer into a wall outlet. This wall outlet should be independent of wall switches and dimmer switches. If you must use a switch controlled outlet, make sure the switch remains on.
18.) Check the LED lights to make sure the transformer is functioning. Both lights should be on. If they are not both on, check the transformer’s connections.
19.) Replace the Apple's cover. You may need to guide the insulator inwards as you close the cover.
20.) Hardware installation is complete. Now you’ll need to set up your ROM Disk with the firmware.
The Double Boot
When using certain configurations with RamKeeper,
your GS will beep twice when you boot it. The first beep is normal power up. The second is RamKeeper installing itself and resetting the computer. Some configurations do not require the double boot.
Chapter One - Getting Started | 15 |