11.) Install the connector plate using the screws provided. Line up the holes of the connector plate with the notches at the top and bottom of the opening in the backplane. Insert and tighten the screws using the hex wrench provided.
Attach connector plate to backplane
12.) If you’re installing a card into the Back Pocket, do so now by lining up the fingers of the memory card’s edge connector with the Back Pocket’s slot and using the heel of one hand to seat the card firmly.
13.) Insert the insulator sheet included with RamKeeper between the back of the RamKeeper and the right side of the computer case. Slide the insulator as far toward the keyboard end as possible.
Even if you aren’t using the Back Pocket or the Flex Connector, insert the insulator. This way, you’ll know where it is when you expand in the future.
Chapter One - Gelling Started | 13 |