7.) Both of the wires that lead to the GelICell should be disconnected. If they aren't, disconnect them now.

Disconnect the battery wires

8.) Remove the RamKeeper from its anti-static bag. Hold the card by its edges, like a photograph.

9.) Connect your card or cards according to the instructions below. Refer to the illustration below for the proper connector and placement of your card(s).

Slot Mover

RamKeeper

Back Pocket

All GS-RAM cards

 

(including 2 Meg Expander)

 

GS-RAM REV C or later

Apple IIGS Memory Expansion Card

GS-RAM Plus REV D or later

RamPak 4GS

 

GS-RAM 2 Meg Expander

RamStackPlus

 

Apple IIGS Memory Expansion Card

OnBoard

 

RamPak 4GS

OctoRam Front Connector

 

RamStackPlus

All GS-RAM cards

 

On Board

(except 2 Meg Expander)

* Due to its large size,

 

 

OctoRam will not fit on the

 

 

back side of RamKeeper

RamKeeper Connections

Chapter One - Getting Started 7