Attaching the Optional SlotMover

The SlotMover is an extension board that shifts the expansion board on the front side of the RamKeeper so that it wont block slot 7. (Slot 7 is commonly used for hard drive controller cards.)

Its new position is between slots 4 and 5. Because 4 is the mouse port and 5 is the disk drive port, you’ll probably never want to put a card in either.

A)First, lay the RamKeeper face up on the table.

B)Notice the white pegs in two holes of the RamKeeper’s front connector. (See picture on page 8.)

C)Push the SlotMover pins into the holes between these two pegs.

Insert SlotMover into connector

D) Push until SlotMover pins are completely seated

Don’t insert a card in the SlotMover until you have plugged RamKeeper into the Memory Expansion Slot.

Chapter One - Getting Started

11