APPENDIX A
Trouble Shooting
This section includes a few methods of working around problems that you may encounter.
Cards are not retaining stored files
◊Open the computer and see if both LED lights are on.
If the LED closest to the back edge of the card is not on, check the transformer wall connection as well as the card connection. Are both plugged in?
If the other LED is off, make sure that the wires are connected to both terminals of the battery, positive to positive, negative to negative. Make sure that the
◊Test cards individually using the testing methods provided with each card.
◊Verify that any RAM chips added to the memory cards meet manufacturers specifications.
Battery not holding charge
◊Make sure your wall transformer is not plugged into a switch controlled socket or a dimmer switch. If it is, any time you turn off the switch (or turn down the dimmer) the RamKeeper is getting its power from the battery.
◊Using a transformer other than the one supplied with the RamKeeper may cause your card not to work properly or your battery not to recharge as it should.
In an area that has a lot of power outages
◊You may need additional battery backup time. You can increase the battery backup time of your Gel/Cell by linking several Gel/Cell batteries together. You can purchase additional Gel/Cell batteries from Applied Engineering Sales.
Appendix A - Trouble Shooting | 53 |