2

1

1.Skid Shoe

2.Skid Shoe Hardware

Figure 18

OS0482

SHEAR BOLTS

IMPORTANT: Use only Ariens shear bolts for replacement. Use of any other type of shear bolt may result in severe damage to unit and

REMOTE DISCHARGE

DEFLECTOR CONTROL

ADJUSTMENT

Figure 20

If discharge deflector does not follow full range of travel:

1.Push deflector remote all the way forward.

2.Loosen adjusting nuts on remote deflector cable attached to the chute deflector (Figure 20).

3.To adjust the deflector lower:

Loosen bottom adjustment nut and tighten top adjustment nut.

To adjust deflector higher:

Loosen top adjustment nut and tighten bottom adjustment nut.

4.Check the deflectors range of travel and repeat adjustment as necessary.

may void the warranty.

Occasionally a foreign object may enter the auger/impeller housing and jam the auger, breaking the shear bolts which secure the auger to the shaft (Figure 19). This allows the auger to turn freely on the shaft which may help prevent damage to gear case and its components.

4

2

3

 

 

 

2

 

2

1

 

1.

Auger

 

 

 

2.

Shear Bolts

 

 

 

Figure 19

OS2610

Replacement

1.Align shear bolt holes in auger with shear bolt holes in the shaft.

2.Drive shear bolt through hole. If shear bolt was broken this will drive remaining part from shaft.

3.Secure shear bolt with nut.

1

1.Adjusting Nuts

2.Cable Support Bracket

3.Remote Deflector Control Cable

4.Discharge Deflector

Figure 20

DISCHARGE CHUTE

If discharge chute does not stay in position while operating, tighten nut (2) at pivot point to increase tension on spring. See Figure 21.

GB - 21