SAFETY

 

PRACTICES AND LAWS

WARNING: To avoid injury to hands

Practice usual and customary safe working

and feet, always disengage clutches,

precautions, for the benefit of yourself and

stop drive motor, turn off and remove

others. Understand and follow all safety

key from switch and wait for all

messages. Be alert to unsafe conditions and

movement to stop before unclogging

the possibility of minor, moderate, or serious

or working on snow thrower.

injury or death. Learn applicable rules and

Hand contact with the rotating

laws in your area. Always follow the practices

impeller is the most common cause of

set forth in this manual.

injury associated with snow throwers.

 

Never use your hand to clean out the

REQUIRED OPERATOR

discharge chute.

TRAINING

Keep hands and feet away from

Original purchaser of this unit was instructed

auger and impeller.

by the seller on safe and proper operation. If

 

SAFETY ALERTS

unit is to be used by someone other than

Look for these symbols to point

original purchaser; loaned, rented or sold,

ALWAYS provide this manual and any

out important safety precautions.

needed safety training before operation.

They mean:

 

Attention!

SAFETY DECALS AND

Personal Safety Is

LOCATIONS

ALWAYS replace missing or damaged Safety

Involved!

Decals. Refer to figure below for Safety Decal

Become Alert!

locations.

Obey The Message!

1

The safety alert symbols above and signal

 

words below are used on decals and in this

 

manual. Read and understand all safety

 

messages.

2

 

DANGER: IMMINENTLY

 

HAZARDOUS SITUATION! If not

 

avoided, WILL RESULT in death or

3

serious injury.

 

WARNING: POTENTIALLY

 

HAZARDOUS SITUATION! If not

 

avoided, COULD RESULT in death or

 

serious injury.

 

CAUTION: POTENTIALLY

 

 

 

 

 

 

HAZARDOUS SITUATION! If not

 

 

 

 

Figure 2

OS2500

avoided, MAY RESULT in minor or

 

 

 

 

 

 

 

 

 

 

 

moderate injury. It may also be used

 

 

1. WARNING!

 

to alert against unsafe practices.

 

 

 

 

 

 

NOTATIONS

 

 

 

 

Read Owner/Operator Manual.

 

 

 

 

NOTE: General reference information for

 

 

 

 

 

 

proper operation and maintenance practices.

 

 

 

IMPORTANT: Specific procedures or

 

 

 

OL1801

 

 

 

 

 

 

 

information required to prevent damage to

 

 

 

 

 

 

unit or attachment.

 

 

 

 

 

 

 

GB - 4