![](/images/backgrounds/108845/108845-368x1.png)
ASSEMBLY
WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.
WARNING: Dropping or tipping over boxed unit could result in personal injury or damage to unit.
PACKAGE CONTENTS
3
5
2
|
|
| 1 |
1. | 4. | Hex Key | |
2. | Unit | 5. | Literature |
Discharge |
| Pack with | |
| Chute |
| Extra Shear |
3. | Chute Crank |
| Bolts |
Figure 3
ASSEMBLY
Tools Required:
•Pliers
•Hex Key (Included)
•
•Tire Gauge
Unfold Handlebar
1.Remove the lower and loosen the upper hardware on the handlebar assembly.
2.Loosen the hardware on the shift rod.
3.Put the speed selector lever in the sixth forward position.
4.Rotate the handlebars into operating position.
NOTE: Be careful not to damage cable spring hooks when rotating handlebars upward.
5.Install and tighten the hardware on the handlebar assembly.
6.Tighten the hardware on the shift rod. Make sure that the rod is correctly seated before tightening.
.
1.Shift Rod
2.Upper and Lower Handlebar Hardware
3.Shift Rod Hardware
4. Handlebar | Figure 4 | OS2520 |
| ||
| OS2515 | |
|
|
GB - 8