Provisioning Access Points

Chapter 2

FIGURE 2-1Provisioning Tab

2.Configure the APs Subnet and Netmask.

This is the subnet from which the AP gets an IP during provisioning. (This is not the IP address the AP will use when deployed. The provisioning subnet should be not be the same as an existing subnet on Mobility Controller.)

3.Select the Port or Port range for provisioning.

To set the Port Range, select the first and the last ports of your range. All the ports in between are automatically selected. (Ports have to be sequentially assigned.)

4.Enter the required information and click Enable.The Port Range screen displays.

10 Aruba AP 60/61

0500160

Installation Guide

December 2005

Page 14
Image 14
Aruba Networks Aruba AP 60/61 manual 1Provisioning Tab