AP Deployment

Chapter 3

Using the Built-In Mounting Slots

The keyhole-shaped slots on the back of the Aruba AP 60/61 can be used to attach the device upright to an indoor wall or shelf.

CAUTION: Do not use the mounting slots to hang the Aruba AP 60/61 from the ceiling, sideways, or in any place where it could fall on people or equipment. For more secure installation, use one of the optional mounting kits.

To hang the Aruba AP 60/61 upright using the mounting slots, perform the following steps.

1.Install two screws in the wall or shelf as shown in Figure 3-3:

Screw/Nail Positions

Screw/Nail Dimensions

(fastened to wall or shelf)

12.7cm (5.00")

Maximum

7.0mm

2.0 mm

3.8 mm clearance from surface

3.0mm

0.27"

0.08" 0.15"

clearance from surface

0.12"

Minimum

5.8mm

1.3 mm clearnace from surface

0.23"

0.05" clearance from surface

FIGURE 3-3Mounting Screw Specifications

If attaching the device to drywall, we recommend using appropriate wall anchors (not included) as shown in Figure 3-4on page 27.

26 Aruba AP 60/61

0500160

Installation Guide

December 2005

Page 30
Image 30
Aruba Networks Aruba AP 60/61 manual Using the Built-In Mounting Slots, 3Mounting Screw Specifications