Aruba Networks Aruba AP 60/61 manual Selecting an Antenna, Maintenance

Models: Aruba AP 60/61

1 68
Download 68 pages 32.7 Kb
Page 34
Image 34

AP Deployment

Chapter 3

Selecting an Antenna

There are three ways to select an AP60 antenna:

1.From the AP console (serial or telnet) enter set_antenna 012 where 0 specifies auto mode, and 1 or 2 chooses a specific antenna. The antenna selection is not persistent and the AP will loose the antenna selection, if rebooted.

2.From the AP boot prompt (apboot>) enter a_antenna 012 or g_antenna 012 to specify an antenna. Enter a save command before booting the AP to save the antenna configuration in the AP’s Flash memory, along with other provisioning parameters.

3.For releases 2.3 and higher, you can provision the antenna selection from the Mobility Controller.

Maintenance

The AP60 and AP61 require no maintenance beyond keeping the AP clean and dust free. To clean the Aruba AP 60/61, use a static-free, dry cloth.

Aruba recommends that these units be inspected annually for damage, dust buildup, and to verify that all connections are secure.

30 Aruba AP 60/61

0500160

Installation Guide

December 2005

Page 34
Image 34
Aruba Networks Aruba AP 60/61 manual Selecting an Antenna, Maintenance