Aruba Networks Aruba AP 60/61 manual AP Support, Access Levels, User Commands, Privileged Commands

Models: Aruba AP 60/61

1 68
Download 68 pages 32.7 Kb
Page 38
Image 38

Troubleshooting

Appendix A

AP Support

Access Levels

zUser Access

User access is a low security level, featuring only the most basic commands. It is available without any additional login after the AP has booted.

zPrivileged Access

Privileged-level access requires the privileged password (the same privileged password used on the Mobility Controller) to be entered using the user level enable command. The privileged access level is available only after the AP has successfully booted and synchronized with Mobility Controller.

User Commands

zping <hostIP address>

Verify IP connectivity between the AP and the host address.

zroute

Display the contents of the AP route table.

zifconfig

Display the AP’s IP address settings.

zenable <privileged password>

Access the AP Support privileged mode.

Privileged Commands

In addition to the user commands, the following commands are available upon successfully entering the privileged mode:

zps

zshow [configstatsversion]

NOTE: These commands should be used only as directed by Aruba Customer Support.

34 Aruba AP 60/61

0500160

Installation Guide

December 2005

Page 38
Image 38
Aruba Networks Aruba AP 60/61 manual AP Support, Access Levels, User Commands, Privileged Commands