Asante Technologies 7000 user manual Mounting Configurations, Installing an MII module

Align the bottom of the MII module with the rails on the inside of the MII slot.

Installation

2

3 Slide the MII module into the MII slot until it stops, then push the module in until it seats with the connector. See Figure 2-7.

MII Module

Figure 2-7 Installing an MII module

4 Screw the module into place by tightening the thumbscrew on the module’s cover. See Figure 2-8.

MII Module

Figure 2-8 Securing an MII module

5 Connect the installed MII module to your network, follow- ing the instructions below.

Mounting Configurations

This section describes how to mount the FriendlyNET 7000 Series Gigabit Switch on a desktop or install it in an equipment rack.

Page 2-6