Asante Technologies 7000 user manual LED Indicators for Port Connections, 100/10Mbps Operation LED

LED Indicators for Port Connections

LED Indicators for Port Connections

All FS7000 Series Switches include 100/10Mbps, Full/Half Duplex and Link/ Data LED indicators for each 10/100 port on the Switch. On the FS7108, the ports and LEDs are numbered 1–8. On FS7x16 Switches, the ports and LEDs are numbered 1–16, A1–A8, and B1–B8.

The LEDs for ports A1–A8 and B1–B8 are only active if a 10/100 8-port expansion module is installed. When a 10/100 8-port XP module is installed in Option Slot A, these ports are numbered A1–A8. When a 10/100 8-port XP module is installed in Option Slot B, these ports are numbered B1–B8.

100/10Mbps Operation LED

The green 100/10Mbps LED indicates whether the port is operating at 100Mbps or 10Mbps. Table 3-2 describes the possible status indications of the 100/10Mbps LED.

Table 3-2 100/10Mbps LED Status Indicators

State

Status

On

Port is operating at 100Mbps

Off

Port is operating at 10Mbps (default operating speed)

Full/Half Duplex LED

The green or amber Full/Half LED indicates port operation in full- or half- duplex mode, and whether collisions are occurring on the port. Table 3-3 describes the possible status indications of the Full/Half LEDs.

Table 3-3 Full/Half LED Status Indicators

State	Status
Green	Port is in full-duplex mode
Blinking Amber	Port is in half-duplex mode and collisions are occurring on
	the port

Off

Port is in half-duplex mode

Page 3-3