3. Slide the module in to the chassis and press until 4. Replace the single securing screw as shown. module is flush with the chassis.

Replacing the Main Hard Disk Drive Module

1. Replace the HDD connector.

2. Place the HDD in the HDD carrier.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.Replace the four screws to secure the carrier.

4.Insert the back first and angle the HDD in place. Push down to connect the HDD interface.

118

Chapter 3

Page 128
Image 128
Aspire Digital MB.ASR06.001, 6930G manual Replacing the Main Hard Disk Drive Module