Asus DSBV-DX, DSBV-DX/C, DSBV-DX/SAS 5.2.1Creating a RAID 0 or RAID 1 set, Using Easy Configuration

Menu	Description
Configure	Allows you to create RAID 0 or RAID 1 set using the Easy
	Configuration or the New Configuration command. This menu also
	allows you to view, add, or clear RAID configurations or select the
	boot drive
Initialize	Allows you to initialize the logical drives of a created RAID set
Objects	Allows you to initialize logical drives or change the logical drive
	parameters
Rebuild	Allows you to rebuild failed drives
Check Consistency	Allows you to check the data consistency of the logical drives of a
	created RAID set

5.2.1Creating a RAID 0 or RAID 1 set

The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New.

In Easy Configuration, the logical drive parameters are set automatically including the size and stripe size (RAID 1 only).

In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only).

Using Easy Configuration

To create a RAID set using the Easy Configuration option:

1.From the utility main menu, highlight Configure, then press <Enter>.

2.Use the arrow keys to select Easy Configuration, then press <Enter>.

5- Chapter 5: RAID configuration