5.2.6Checking the drives for data consistency
You can check and verify the accuracy of data redundancy in the selected logical drive. The utility can automatically detect and/or detect and correct any differences in data redundancy depending on the selected option in the Objects > Adapter menu.
The Check Consistency command is available only for logical drives included in a RAID 1 set.
Using the Check Consistency
To check data consistency using the Check Consistency command:
1.From the Management Menu, select Check Consistency, then press <Enter>.
2.The screen displays the available RAID set(s) and prompts you to select the logical drive to check. Press the <Spacebar> to select the logical drive from the Logical Drive selection, then press <F10>.
Chapter 5: RAID configuration |