4.The Select New Array Type screen apprears.
Use the arrow keys to select Create IS Volume, then press <Enter>.
|
|
|
|
|
| ||
| LSI Logic Config Utility |
| v6.08.05.00 (2006.08.02) | ||||
| Select New Array Type | ||||||
|
|
|
|
| Create Integrated Mirror Array of 2 | ||
|
| Create IM Volume |
|
| |||
|
|
|
|
| disks plus an optional hot spare. Data | ||
|
|
|
|
| on the primary disk may be migrated. | ||
|
|
|
|
| Create Integrated Mirrored Enhanced | ||
|
| Create IME Volume |
|
| |||
|
|
|
|
| Array of 3 to 8 disks including an | ||
|
|
|
|
| optional hot spare. | ||
|
|
|
|
| ALL DATA on array disks will be DELETED! | ||
|
|
|
|
| Create Integrated Striping array of | ||
|
| Create IS Volume |
| ||||
|
|
|
|
| 2 to 8 disks. | ||
|
|
|
|
| ALL DATA on array disks will be DELETED! | ||
|
|
|
|
|
|
| |
| Esc = Exit Menu | F1/Shift+1 = Help |
|
| |||
Enter = Choose array type to create
5.The Create New Array screen shows the disks you can add to make up the IS volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press <+>,
|
| LSI Logic Config Utility | v6.08.05.00 (2006.08.02) |
|
|
|
| |||||
|
| Create New Array |
|
|
|
|
|
|
|
|
| |
|
| Array Type: |
| IS |
|
|
|
|
|
| ||
|
| Array Size(MB): |
| 102996 |
|
|
|
|
|
| ||
|
| Slot | Device Identifier |
| RAID | Hot | Drive | Pred | Size |
|
| |
|
| Num |
|
| Disk | Spr | Status | Fail | (MB) |
|
| |
|
| 0 | SEAGATE ST373454SS | 0003 | [Yes] |
| [NO] | 70007 |
|
| ||
|
| 1 | SEAGATE ST373454SS | 0003 | [NO] |
| [NO] | 70007 |
|
| ||
|
| 2 | SEAGATE ST373454SS | 0003 | [Yes] |
| [NO] | 35003 |
|
| ||
|
| 3 | SEAGATE ST373454SS | 0003 | [Yes] |
| [NO] | 35003 |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu F1/Shift+1 = Help |
|
|
|
|
|
|
|
| ||
|
| SPACE/+/- = Select disk for array or hot spare | C = Create array |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
By default, the RAID Disk field shows No before array creation. This field is grayed out under the following conditions:
•The disk does not meet the minimum requirements for use in a RAID array.
•The disk is not large enough to mirror existing data on the primary drive.
•The disk has been selected as the Hot Spare for the RAID array.
•The disk is already part of another array.
Chapter 5: RAID configuration |