5.3.6Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a RAID volume hard disk drive deletes all internal RAID structure on the drive.

To reset a RAID set hard disk drive:

1.From the utility main menu, select 3. Reset Disks to Non-RAID, then press <Enter> to display this screen.

[ RESET RAID DATA ]

Resetting RAID data will remove internal RAID structures from the selected RAID disks. By removing these structures, the drive will revert back to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost.

Port

Drive Model

Serial #

Size

Status

 

 

 

 

 

0

XXXXXXXXXXXX

XXXXXXXX

XX.XGB

Member Disk

1

XXXXXXXXXXXX

XXXXXXXX

XX.XGB

Member Disk

Select the disks that should be reset.

[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

2.Use the up/down arrow key to highlight the RAID set drive you want to reset, then press <Spacebar> to select.

3.Press <Enter> to reset the RAID set drive. A confirmation message appears.

4.Press <Y> to reset the drive or press <N> to return to the utility main menu.

5.Follow steps 2 to 4 to select and reset other RAID set drives.

5.3.7Exiting the Intel® Matrix Storage Manager

To exit the utility:

1.From the utility main menu, select 4. Exit, then press <Enter>. This window appears.

[ CONFIRM EXIT ]

Are you sure you want to exit? (Y/N):

2.Press <Y> to exit or press <N> to return to the utility main menu.

ASUS DSBV-DX Series

5-37