6.The Create New Array screen shows the disks you can add to make up the IM volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press <+>,
You may also specify the Hot Spare disk here. Select the disk, then move the cursor to the Hot Spr column, then press <+>,
|
| LSI Logic Config Utility | v6.08.05.00 (2006.08.02) |
|
|
|
| ||||||
|
| Create New Array |
|
|
|
|
|
|
|
|
| ||
|
| Array Type: |
|
| IM |
|
|
|
|
|
| ||
|
| Array Size(MB): |
|
|
|
|
|
|
|
|
| ||
|
| Slot | Device Identifier |
| RAID | Hot | Drive | Pred | Size |
|
| ||
|
| Num |
|
|
| Disk | Spr | Status | Fail | (MB) |
|
| |
|
| 0 | SEAGATE ST373454SS | 0003 | [NO] |
| [NO] | 70007 |
|
| |||
|
| 1 | SEAGATE ST373454SS | 0003 | [NO] |
| [NO] | 70007 |
|
| |||
|
| 2 | SEAGATE ST373454SS | 0003 | [NO] |
| [NO] | 35003 |
|
| |||
|
| 3 | SEAGATE ST373454SS | 0003 | [NO] |
| [NO] | 35003 |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu | F1/Shift+1 = Help |
|
|
|
|
|
|
|
| ||
|
| SPACE/+/- = Select disk for array or hot spare | C = Create array |
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
By default, the RAID Disk field shows No before array creation. This field is grayed out under the following conditions:
•The disk does not meet the minimum requirements for use in a RAID array.
•The disk is not large enough to mirror existing data on the primary drive.
•The disk has been selected as the Hot Spare for the RAID array.
•The disk is already part of another array.
ASUS |