5.2.3Adding or viewing a RAID configuration

You can add a new RAID configuration or view an existing configuration using the View/Add Configuration command.

Adding a new RAID configuration

To add a new RAID configuration:

1.From the Management Menu, highlight Configure, then press <Enter>.

2.Use the arrow keys to select View/Add Configuration, then press <Enter>.

3.The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press <SpaceBar>. When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.

The information of the selected hard disk drive displays at the bottom of the screen.

5-14

Chapter 5: RAID configuration