3.The Create New Array screen shows the disks you can add to make up the IME volume.
Integrated Mirroring Enhanced (IME) supports three to eight disks, or seven mirrored disks plus a hot spare disk. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press <+>,
You may also specify the Hot Spare disk here. Select the disk, then move the cursor to the Hot Spr column, then press <+>,
|
| LSI Logic Config Utility | v6.08.05.00 (2006.08.02) |
|
|
|
|
| ||||||
|
| Create New Array |
|
|
|
|
|
|
|
|
|
| ||
|
| Array Type: |
| IME |
|
|
|
|
|
|
| |||
|
| Array Size(MB): |
| 51498 |
|
|
|
|
|
|
| |||
|
| Slot | Device Identifier |
| RAID | Hot | Drive | Pred | Size |
|
|
| ||
|
| Num |
|
| Disk | Spr | Status | Fail | (MB) |
|
|
| ||
|
| 0 | SEAGATE ST373454SS | 0003 | [Yes] |
| [NO] | 70007 |
|
|
| |||
|
| 1 | SEAGATE ST373454SS | 0003 | [NO] |
| [NO] | 70007 |
|
|
| |||
|
| 2 | SEAGATE ST373454SS | 0003 | [Yes] |
| [NO] | 35003 |
|
|
| |||
|
| 3 | SEAGATE ST373454SS | 0003 | [Yes] |
| [NO] | 35003 |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu F1/Shift+1 = Help |
|
|
|
|
|
|
|
|
| |||
|
| SPACE/+/- = Select disk for array or hot spare | C = Create array |
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
By default, the RAID Disk field shows No before array creation. This field is grayed out under the following conditions:
•The disk does not meet the minimum requirements for use in a RAID array.
•The disk is not large enough to mirror existing data on the primary drive.
•The disk has been selected as the Hot Spare for the RAID array.
•The disk is already part of another array.
4.Repeat step 5 to add the other disks to the volume.
5.When done, press <C> to create the array, then select Save changes then exit this menu.
Create and save new array?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
Exit the Configuration Utility and Reboot
6.The utility creates the array.
|
|
| LSI Logic Config Utility | v6.08.05.00 (2006.08.02) |
|
|
| |
|
|
| Processing...may take up 1 minute |
|
|
|
| |
|
|
|
|
|
|
| ||
|
|
| Creating RAID array |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Chapter 5: RAID configuration | |||||