Interrupt [IRQ 3]
Allows you to set the interrupt for COM2 port.
Configuration options: [IRQ 3] [IRQ 4]
Parallel port [Enabled]Allows you to configure the parallel port.
Configuration options: [Disabled] [Enabled] [Auto]
Base I/O address [378]
Allows you to select the base I/O address for the parallel port. Configuration options: [378] [278] [3BC]
Interrupt [IRQ 7]
Allows you to set the interrupt for the parallel port.
Configuration options: [IRQ 5] [IRQ 7]
Mode [ECP]
Allows you to set the mode for the parallel port.
Configuration options: [Output only]
DMA channel [DMA 3]
Allows you to set the DMA channel for the parallel port. Configuration options: [DMA 1] [DMA 3]
Floppy disk controller [Enabled]Allows you to configure the floppy disk controller.
Configuration options: [Disabled] [Enabled] [Auto]
Chapter 4: BIOS setup |