8.USB connector
This connector is for USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed.
NC
GND
USB PortB(+)
USB
Power
USB34
PIN1
| PortA(+) | |
) - | GND | |
PortA( | ||
Power |
|
|
USB |
| |
| USB | |
The USB port module is purchased separately.
9.Serial port connector
This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.
COM2
PIN1
The serial port module is purchased separately.
Chapter 2: Hardware information |