Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
|
|
|
|
| Performing the following function |
| |
| Load Image File | BIOS.WPH |
|
| Verify interface information |
|
|
| Backup system BIOS ROM |
|
|
| Check flash memory type(s) |
|
|
| Flash memory block: |
|
|
| Save block |
|
|
| Restore block |
|
|
| Zero out block |
|
|
| Erase block |
|
|
| Program block |
|
|
| Verify block |
|
|
| Flash programming complete |
|
|
| 30% Read in |
|
|
|
|
|
|
|
|
|
|
Identifying flash memory part type | 00:00:00 (18) | ||
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure!
6.When the utility completes the updating process, a message appears, informing you that the flash memory has been programmed successfully.
Phoenix Phlash16 Utility Version 1.6.1.9
Phoenix Phlash16 Status
Flash memory has been successfully programmed
PRESS ANY KEY TO RESTART THE SYSTEM
If the system does not restart
TURN THE POWER OFF, THEN ON
Flash memory block: |
|
Save block |
|
Restore block | .......................... |
Zero out block | .......................... |
Erase block | √√√√√√√√√√√√√√√√√√√√√√√√√. |
Program block | .√√√√√√√√√√√√√√√√√√√√√√√√√√ |
Verify block | .√√√√√√√√√√√√√√√√√√√√√√√√√√ |
Flash programming complete
| Flash part: SST49LF008A DeviceID: 5a | Mfr.ID: bf |
|
Ready to restart the system | 00:00:00 (1E) | ||
4- | Chapter 4: BIOS setup |