IBM OS/2
B. Install Adaptec AIC-7890 Driver
The AIC78U2.ADD Ultra2SCSI driver only supports IBM OS/2 Warp 3.x, 4.0 and
4.0SMP. The AIC7870.ADD UltraSCSI or earlier driver also supports IBM OS/2 version 2.1x in addition to versions 3.x, 4.0 and 4.0 SMP.
Installing a New Driver or Updating an Existing Driver for IBM OS/2 2.1X/Warp/SMP
1.Open the IBM OS/2 System Folder, then open the System Setup folder.
2.If running IBM OS/2 Warp 4.0, open the Install/Remove Folder.
3.
4.Insert the Adaptec 7800 Family Manager Set v3.00 floppy in the appropriate drive.
5.Change to the directory where the driver is located.
a)For Ultra2SCSI host adapters, the driver will be located in \OS2\AIC78U2
b)For UltraSCSI or earlier host adapters, the driver will be located in \OS2\AIC7870
6.a) For Ultra2SCSI host adapters,
When you find the driver (AIC78U2.ADD), select INSTALL.
b)For UltraSCSI or earlier host adapters,
When you find the driver (AIC7870.ADD), select INSTALL.
7.After the install finishes, select EXIT and reboot the computer.
NOTE: Be sure to plug in the Ultra2SCSI card if updating from UltraSCSI or earlier host adapters to the Ultra2SCSI host adapter.You may also install the driver manually.
For Ultra2SCSI host adapters:
Copy AIC78U2.ADD to C:\OS2\BOOT.
Add a line to your CONFIG.SYS that says BASEDEV=AIC78U2.ADD /V.
For UltraSCSI or earlier host adapters:
Copy AIC7870.ADD to C:\OS2\BOOT.
Add a line to your config.sys that says BASEDEV=AIC7870.ADD /V.
B.
IBM OS/2
ASUS | 105 |