III.INSTALLATION
3.Central Processing Unit (CPU)
This motherboard provides two CPU Slot 1s for Pentium II processors packaged in SEC cartridges.
Pentium II Processor
You should check to see that you have the following items:
Lock Holes
Captive Nut
Two Pentium II Retention Mechanisms | Two Attach Mount Bridges | ||
|
| (factory installed) | |
|
|
| (8) |
| Top Bar (4) |
|
|
(5) | Pin |
|
|
|
|
| |
| Posts |
|
|
| (6) |
|
|
| Base (7) | Larger Fin should |
|
|
|
| |
|
| be on the bottom. | Heatsink bottom Groove |
|
|
| |
|
|
| for the Support Top Bar |
Heatsink Support Base/Top Bar | Pentium II Processor Heatsink |
The recommended heatsinks (see section on recommended heatsinks for more in- formation) for the Pentium II processor are those with
WARNING! Be sure that there is sufficient air circulation across the processor’s heatsink by regularly checking that your CPU fan is working. Without sufficient circulation, the processor could overheat and damage both the processor and the motherboard. You may install an auxiliary fan, if necessary.
Other Important Items
Intel Pentium II Processor in an SEC cartridge
ASUS
INSTALLATION | CPU |
III. |
|
|
|
ASUS | 19 |