OS/2 IBM

Driver VGA .A

IBM OS/2

6.Type the following:

RSPDSPI /PK:VGA /SK:NONE /S:E:\OS2SE21\ /T:C:

In /T:C:, C: is the target drive where OS/2 is installed. In /S:E:, E: is the source CD-ROM or LAN drive. Then press Enter.

7.Perform a shutdown and restart your computer.

•If you are installing this driver on OS/2 Warp 3.0, do the following:

1.Restart your computer.

2.Simultaneously press Alt and F1 key immediately when a square block appears in the top left hand corner.

3.Press 'v' key for VGA.

•If you are installing this driver on OS/2 Warp (Merlin) 4.0, do the following:

1.Restart your computer.

2.Simultaneously press Alt and F1 key immediately when a square block appears in the top left hand corner.

3.Press F3 key for VGA.

96

ASUS P2B-D2 User’s Manual