![](/images/backgrounds/166087/166087-15264x1.png)
98 WINDOWS
Driver LAN .A
WINDOWS 98
A. Install Intel LAN Driver
Automatic Configuration
Some computers automatically detect and configure adapters or interfaces while boot- ing. The network interface’s IRQ level and I/O address of this motherbaord are automatically set by the BIOS each time you start your computer.
Start your computer to automatically configure the network interface or adapter. Configuration is complete when Windows 98 starts. If your computer displays an error while booting, it may require additional steps to configure.
1.Start the system with Windows 98 installed.
2.From "Start", point to Settings, and then click on the Control Panel icon.
3.In Control Panel,
4.Select Device Manager, and then
5.Select the driver, and then click Update Driver.
6.Click Next.
7.Select Search for a better driver than the one your device is using now. (Recommended), and then click Next.
8.Select Specify a Location, and insert the ASUS
9.Select The update driver (Recommended), and then click Next.
NOTE: If you don't see this message, clickBack. Check that the ASUS
10.If the step is correct, you will see the message "Location of driver: ASUS E:\LAN\NET82557.INF". Click Next.
11.Click Finish.
12.Close the Update Driver window.
13.Close the System Properties window.
14.Restart your computer.
After restarting Windows 98, you should be able to connect to your network by double- clicking Network Neighboorhood.
64 | ASUS |