WINDOWS NT 4.0

B. Install Intel LAN Driver

NOTE: Do not install the LAN driver directly from the P2B-D2 Support CD! You must copy all subdirectories and files that are under E:\LAN (assume E is the CD- ROM drive) to a floppy disk or hard disk and then install the LAN driver from it.

1.Start system with the Windows NT 4.0 installed.

2.Copy all subdirectories and files that are under E:\LAN (assume E is the CD- ROM) to a floppy disk or hard disk.

3.From "Start", point to Settings, and then click Control Panel.

4.In Control Panel, double-click on the Network icon.

5.Select the Adapters tab. Select Intel 82557-based 10/100 Ethernet PCI Adapter and then click Remove.

NOTE: When you install Windows NT4.0, it auto detects the Network card and will install the "Intel 82557-based 10/100 Ethernet PCI Adapter". However, this adapter will not work in NT4.0, so you must "remove" this driver before you adding a new driver.

6.Click Add. The Select Network Adapter window appears.

7.Click Have disk.

B. LAN Driver

WINDOWS NT 4.0

ASUS P2B-D2 User’s Manual

81